PCI 32-Bit 10/100/1000 (1G) Mbps Network Adaptor (VIA Chipset)

    Features & Specifications:
  • Integrated Gigabit Ethernet PHY and MAC functions; Full/half-duplex and 10/100/1000 Mbps triple-speed operations support
  • IEEE802.3ab Auto-Negotiation support
  • Automatic detection and correction of cable pair polarity, along woth Auto MDI/MDIX cable crossover or pair swap detection
  • IEEE 802.3x compliant flow control support for full-duplex operation;Collision-based back-pressure support for half-duplex operation
  • IEEE 802.1p Priority Queuing support with 4 classes of priority queues
  • IEEE 802.1Q virtual LAN(VLAN) support with 63 BLAN tags
  • 64KB deep on-chip Rx and Tx packet buffer
  • IPv4 TCP, IP and UDP checksum off-loading capability over Rx and Tx
  • IPv4 TCP segmentation off-loading capability over Tx
  • Jumbo frame support up to 16KB
  • Adaptive interrupt
  • Ring type packet-descriptor management circuit; Support multiple packet-descriptor fetching in a single burst
  • Entering Power Saving mode by automatic link speed switching from 1000Mbps down to 10 or 100Mbps in standby
  • -up from Pre-ACPI and AbnormalShut-Down
  • Hardware and sofrware counters support for traffic statistics gathering
  • DMI 2.0(Destip Management Interface), WfM 2.0(Wirec fo management) compliant
  • Advanced packet filtering
  • Provide analysis tooling for 1000Base-T type ling over its link quality, cable diagnostics, cable loss, return loss and NEXT loss
  • One built-in RJ-45 connector
  • Two LED indicators: Link/Activity
  • Driver supprot for: MS Widow server 2003/XP/NT/ME/2000/98SE, Read Hat Linux 7.3(kernel 2.4.18-3) or later, Novell Netware 4.2/5.x/6.x/ODI 1.11